Mid-Rear Frame Section (ART-169R-L) Driver Side

Description

Fitment: 2007-2014 2nd gen Chevrolet Silverado 1500 Reg Cab & 3rd gen GMC Sierra 1500 Reg Cab, Drivers Side

Our SafeTCap® ART-169R-L Mid-Rear Frame Section was created to fit the regular cab, 2nd gen Silverado 1500, and 3rd gen Sierra 1500. We’ve designed the ART-169 to cap the frame beginning right after the rear cab mount and ending just before the rear fuel tank cross member (ART-139-2). This part is approximately 31″ long and will cap the entire height of the frame leaving only .75″ of the top of the original frame to weld the SafeTCap® frame kit to. The ART-169 is designed to be installed without the need to remove the forward bed mount and/or spring mount from your frame, depending on the severity of the rust. The ART-169 has removeable plates to notch around the bed mount and original spring mount by just continuing the cut lines, see pictures for details.  This part was designed to fit the 6.5′ bed.

Our ART-169’s are manufactured from only domestic 11ga steel. Comes with detailed installation instructions

If you need to replace or repair the rear leaf spring mount, see our listing for the ART-171 Rear Spring Mount.

PLEASE NOTE: THIS PART IS MADE FOR THE SHORT BED ONLY!!

If have a 2014 model, please call us. We will need photos to ensure we can provide you with the correct part.

We Make the Kits, that Fit!